Most people don’t pay much attention to the health of their car. They just grab the keys and hit the gas pedal. No one gives attention to other things except checking the fuel. It is your responsibility to inspect the condition of the vehicle once you get behind the wheels for you and your family’s safety. An important part of the car inspection is checking the tyres of the vehicles.
Here is how you can do a quick evaluation of the tyre, so you can avoid any accident or any other mishap.
Check Tread Depth
Inspect the depth of tread to be certain of the condition of the tyre. Tyres with worn-out tread can be dangerous to drive on as they struggle with gripping the road. They become even dangerous on the wet and slippery road as the rubber loses its ability to maintain traction with the surface.
If you live in the United States, you can do the penny test to get an idea of the tread depth. You can place the penny upside down inside the tread. Now, notice the top of Lincoln’s head, if you can clearly see his head, then it is time for new tyres.
If your tyres have less depth, then limit the usage of the car. Use your car on well-paved roads and highways and avoid taking any bumpy route as your car can lose control under harsh conditions.
While you are doing the tyre inspection with a penny, don’t forget to put it into three or four different spots to check uneven wear around the tyre. If you notice uneven wear, this can indicate a problem with suspension or wheel alignment.
Another thing you need to look for is the exposed cords or fabric strands. These can stick out of the outer surface of the tyre is old or it is damaged.
Look for cracks
Cracks appear on the tyre when the rubber becomes old. Try to notice them on sidewalls or between the tread blocks. Minor cracks are fine but if they expose the tread, it can cause severe problems. You can ignore minor cracks but it is important to keep an eye on them to prevent any uncertain situation.
Inspecting the sidewalls, if you notice any large cracks which expose inner tyre layers then you need to replace your tyres.
Check for objects, bulges or punctures in the tyre
Carefully observe the surface of the tyre and look for unusual objects. Pieces of metals and nails could be stuck on your tyre. If you don’t get rid of these, it can cause puncture or leak.
It can be difficult to notice a puncture because the object that caused the damage is still there. However, you will have to replace your tyre soon if you don’t fix it.
Now, similarly, inspect the sidewall and look for objects that shouldn’t be there. Try looking for cuts or protruding surface. Touch the surface of your tyre and try notice any area that looks softer than the rest of the tyre if pressed.
Bulges tell a lot about tyre separation. The air can enter between the layers.
Check your tyre pressure
First, you need to find the proper tyre pressure for your vehicle from the owner’s manual. Check all four tyres’ pressure. Notice the reading and compare it to the ideal reading available in the owner’s manual. If the pressure is low, inflate the tyres with air until it reaches the optimal level.
After you follow these steps, you can easily inspect your tyres. We recommend you to perform a tyre inspection weekly. If you feel like your car has any issue mentioned above, then consider buying new tyres. A variety of tyres are now available online.
You can buy tyres online Qatar from renowned brands such as Dunlop or Falken. However, we will suggest you do a bit of research before you purchase anything.